Celebrating The 100th Anniversary Of Rolex’s First Observatory Certified Watch

The dial is proud to say that all Rolex Replica Watches are now certified as astronomical clocks, which means that each has undergone rigorously tested timing accuracy. With this in mind, we can – and maybe we make the accuracy of a Rolex watch for granted, now let’s take a look at the time and discover that the Rolex watch has created the first astronomical clock certificate, tested and gained incredible Asked the Qiu Tianwentai 100 years ago.

Prove that the precision of the high-end watches of interest will certainly be familiar with COSC (Controle Officiel Switzerland des Chronometres), the official Swiss Astronomical Clock Test Institute has issued certificates since 1973. The history of astronomical clock certification dates back hundreds of years, along with the performance of these clocks and superior quality and timing pocket watches that actually act as navigational instruments on the deck of the entire sea. Therefore, the accuracy of such equipment is critical, just as deviations over a few seconds per day will largely compromise the accuracy of the ship’s position.

While the watch from the world of a lady accessories becomes a day-to-day wear that is quite complex and worthy of special articles, now we will focus on the only biggest problem with the earlier the wearing of the watch example, reliability. We also discussed the related issues of resistance (or lack of) dust and water in our history articles about diving watches, and now it is equally important for us to focus on other issues that watch manufacturers have to face: timing accuracy. In addition to being quite fragile and requiring special care, early watches were also extremely inaccurate, with gains and losses of more than a few minutes per day, destined for their jewelry or accessories rather than “real watches”, telling time in a reliable way.

The founder of Hans Wilsdorf Cheap Rolex Replica Watches is the first to realize that watches can never be truly popular, as long as the above key issues remain. At the time, in the first decade of the 20th century, he was also one of the few must-see and believe in the potential of watches to become a must-have item. It will be worn by not just the rich, but by almost everyone in the world. It is this strong belief that motivates him to find a solution to the reliability problem of the watch. Actually telling you the whole story we must note that as early as 1910 his perseverance coupled with some company’s clever engineering solutions led to the first day clock certified by Rolex watches, although today’s brand does not communicate the details of observation or astronomical clock Quality certificate.

Having said that, it is this very early achievement that shows the potential of Wilsdorf and his team at Best Rolex Replica Watches, which ultimately leads to really important today, as we are discussing. After their initial success in 1910, they continued to further study the accuracy of the watch movement and only four years later, in 1914, their work came to be realized, as a small gold Rolex watch was awarded the “Class A” certificate for the first time. Qiu Tianwentai is in the UK.

Why this is a very important historical moment watch is that the Church of the Astronomical Observatory is the world’s most famous institution awarded the Astronomical Clock Certificate is the responsibility of Qiu to submit all the watches to ensure that they are reliable enough for the Royal Navy. The Observatory’s requirements are met by 45-day long-term tests for all watches in five different locations, at three different temperatures (cold, oven-hot and environment) and small Rolex watches are all on average less than + 1 second per day. speed!

For those who are addicted to timing accuracy, we recommend browsing the top of the image as it is “the result of the abstract experiment,” in other words, the documentation, including the results of the interest rate submitted to the test of the Fake Rolex Watches Observatory. When the astronomical clock is tested (or competitive), the point is to get 100 points in the different categories and the hills can be tested – the perfect watch, this is. 40 points are awarded to those who are completely lacking in daily rate changes (ie watch + 0 seconds running day), 40 minutes of absolute free change speed and position change (ie the position of a watch whose timing performance is not affected), and 20 The effect of perfect temperature compensation.

There are a lot of things to consider about watches, of course, you can’t take everything for justice. For example, the sport can be adjusted to run at a near-perfect speed in one location, which will greatly disrupt the interest rate at other locations. This is a game of all the balance performance data, the main power of the torque, the balance wheel of the moment of inertia, and the length of the balance spring. The small Rolex Replica has a total of 77.3 points and 100, achieving “significant advantages.”

In summary, what makes this achievement really important from our perspective? Specifically, this is a hundred years ago today, July 15, 1914, a tiny gold watch finally proved that the watch is The body is able to be accurate, and maintenance claims that in the past 45 days in a controlled environment, many disasters submitted by real life will be held.

In essence, the watch was a bumpy beginning in the early 1900s, and it was considered fragile, unreliable and inaccurate. In the past century, it has become highly accurate, more resistant to shocks, temperature changes, and water, and has therefore become an important part of people’s daily lives. But all these incredible feats may never be realized, the watch is still notoriously inaccurate, presenting its useless purpose in addition to wearing jewelry or accomplice. In view of this, we should trace the history of watches to a hundred years ago, acknowledging that a century ago it was a little bit to prove that watches can be accurate and larger, more traditional clocks and pocket watches.

Everest Leather Strap For Rolex Watch Preview

Pursuing the creation of a better mousetrap, Everest looks like a collection of Rolex Replica Watches with their latest enhanced Rolex wearing experience. In September, the Everest band will release their Everest leather collection to bring another element of comfort and versatility to Rolex watches. This is in addition to the rubber belt series of Everest Rolex. The Everest leather series watchstrap combines the comfort of leather quality and reliability with a solid 316 l stainless steel link finish that exceeds a replaceable 316 l stainless steel buckle.

Rolex wear already knows to use the aftermarket leather shoulder strap, but the key omits a basic belt set solid support spring bar end link. It can be said that the Cheap Rolex Replica Watches and the belt without the tail ring give a very practical look, but at the expense of polishing, the power of the spring bar is sacrificed. A solid end link prevents the spring rod from being bent, inadvertently outward. Making these belts stand out is the utilization of Everest’s 316 l steel tail ring for 20 mm wide ear width Rolex watches just without the sewage between the lifting lugs and the case. The fit between the end links and the case is like the original Rolex end link slide in no lateral movement, no rounded edges, suitable for like it is.

As Patrick oversaw the Rolex RubberB rubber strap pointed out in aBlogtoWatch, there are many aftermarket selections and varieties, but at the level of quality across the map. There is no doubt that the Everest Leather Collection is the quality level of Fake Rolex Watches for free materials, processing tolerances, and leather options. At the first offering of Mount Everest, the shoulder straps can be worn in saddle brown, vintage brown and black burdock leather, as well as black and brown crocodiles to look at the faces, borders, and your emotions. Everest plans to provide a Córdoba leather shoulder strap in the near future.

Rather than navigating the various features of leather watchstrap production, Everest relies on industry-leading watchstrap manufacturers all over the world. Everest chose these professional manufacturers to create shoulder straps for them, Omega, Panerai, and the Whaling Commission. Looking at the company, like Mount Everest, would rather focus on the characteristics of the end links instead of making leather shoulder straps. The shoulder straps of Mount Everest are well stitched, the eucalyptus is windy, and the leather looks flawless. The finished strap is detachable buckled by the same 316 l stainless steel surgery and has the same Best Rolex Replica Watches brush finish to match Rolex’s brush lugs. The Everest buckle is detachable using the same 1.6 mm screwdriver for adjusting the Rolex link. Tang buckled to the buttonhole to meet the small sewage and leather do not stretch exercise; it seems that the hole and Tang buckle together.

Installing the belt is a relatively easy task when using the right tool. The best tool to remove and install the Rolex Replica bracelet is the Bergeon 6825 ff good fork (ff). Although this tool is not an entry-level price, it is worth it if you see yourself disconnected from the shoulder strap. Other standard spring bar tools work, but the 6825 prevents ear scratches because the tool’s tweezer-like action compresses both ends while the springbar is easy to lift and replant solids with the watch.

A simple DIY removal and installation is released on the Minus4Plus6 Rolex strap. A simple event to install the Everest belt is the solid end link, which slides right. There is no stuffing belt in the spring bar, or no squeeze into the leather springbar and the case, NATO with a thick leather shoulder strap. Slide links to make sure to include the springbars settings and you.

I wore the Twilight Everest belt at the Rolex Greenwich Time 116710 BLNR (blue/black border), my favorite dealer, Fourtane, I borrowed for a week. Although I have worn Rolex watches for more than 25 years, this is never a belt, I feel that any watch with a band is not complimented. I soon discovered that the situation is different from the Everest belt. The end of the bead of the brush looks like it is done at home. Wear a stainless steel or rubber strap and a belt that fits your wrist. After a week of wearing Everest belts, belt-working accessories are like working gloves. Stretch with the silicon ribbon and give them their basic shape. The Everest belt, on the other hand, also has the same power feel, like a stainless steel bracelet, but the lighter weight makes it disappear from your wrist. After wearing leather Rolex, I understand why Rolex offers some of their choices for leather.

After the successful Kickstarter campaign, the Everest rubber strap was launched, and Everest continued the same formula in the Everest leather collection. Until August 15th, Everest Kickstarter supporters were able to receive the burdock belt, with a chain link at $190 and a price of $88 less than the post-Kickstarter retail price. Crocodile skin starts at $250 and $103 is less than the planned retail price. There are other quantity discounts available to supporters of the early Everest leather collection. Everest belt wear can be ordered with an extra leather shoulder strap without ordering another end link/buckle combination for the future.

There is no doubt that the Everest leather shoulder strap brings a new wearing experience to Rolex wearers. The Everest leather shoulder strap has design, health and integrity, and Rolex wear is expected to cost less than the original belt factory at a price point. The Everest Leather Collection is easy to install and brings you a brand new look and feel to your Rolex watch.